HP (Hewlett-Packard) RP4410 ユーザーズマニュアル

ページ / 288
Chapter 2
45
2
System Specifications
This chapter provides information on the basic system configuration, physical specifications, and 
requirements for the HP 9000 rp4410 or rp4440 server.
This chapter addresses the following topics:
System Configuration
Table 2-1 lists the minimum and maximum configuration options for the HP 9000 rp4410 and rp4440 servers.
Table 2-1
Minimum and Maximum Server Configurations
Component
rp4410
rp4440
Microprocessors
One or two dual-core processor modules, 
each containing two PA RISC
800 MHz/1.5 MB cache or
1 GHz/1.5 MB cache. The CPUs are 
available with 32 MB or 64 MB L2 
cache. A single CPU or all installed 
CPUs can be activated.
Up to four dual-core processor modules, 
each containing two PA RISC
800 MHz/1.5 MB cache or
1 GHz/1.5 MB cache. The CPUs are 
available with 32 MB or 64 MB L2 cache. 
All installed CPUs (2, 4, 6, or 8) are 
activated.
Memory
Supports up to 16 Double Data Rate 
(DDR) registered ECC memory, in 
PC2100 DIMMs. Up to 32 DDR DIMMs 
can be optionally used. Maximum 
memory is 128 GB. Supported DDR 
DIMM sizes: 256 MB and 512 MB, 1 GB, 
2 GB, and 4 GB.
Supports up to 16 Double Data Rate 
(DDR) registered ECC memory, in 
PC2100 DIMMs. Up to 32 DDR DIMMs 
can be optionally used. Maximum 
memory is 128 GB. Supported DDR 
DIMM sizes: 256 MB, 512 MB, 1 GB, 2 
GB, and 4 GB.
HDDs
2-36 GB, 15K RPM Ultra320 SCSI 
hot-plug disks or
2-73 GB, 15K RPM Ultra320 SCSI 
hot-plug disks or
2-146 GB, 10K RPM Ultra320 SCSI 
hot-plug disks.
2-36 GB, 15K RPM Ultra320 SCSI 
hot-plug disks or
2-73 GB, 15K RPM Ultra320 SCSI 
hot-plug disks or
2-146 GB, 10K RPM Ultra320 SCSI 
hot-plug disks.
SCSI
Integrated Ultra-3 SCSI dual channel 
controller; 80 Mb/s transfer rate with 
two external 68-pin connectors.
Integrated Ultra-3 SCSI dual channel 
controller; 80 Mb/s transfer rate with 
two external 68-pin connectors.
LAN
PCI GB Fast Ethernet controller.
PCI GB Fast Ethernet controller.