Fujitsu MX130 S2 ユーザーズマニュアル

40

Upgrade and Maintenance Manual

 MX130 

S2

The system has a hibernate mode (S4 mode) from which it can be woken up via 
WOL (Wake-up On LAN). In order to use this feature, however, the S4 mode 
must be activated/enabled in the corresponding operating system installed.

The following description is an example and can only serve as a guide for other 
operating systems.

To bring your system into S4 mode (= hibernate mode), proceed as follows:

Ê

Open the command line tool using C:\Windows\System32\cmd.exe and 
enter the following command to activate S4 mode:

To set the driver for the internal LAN controller:

Ê

Open the Device Manager via Start - Control Panel - System - Device Manager.

Ê

Select Network Adapters.

Ê

Select the internal LAN controller: Broadcom Netlink™ Gigabit Ethernet.

Ê

Select Properties in the overview, and then select Power Management.

Ê

In the Wake on LAN field, enable the following option:

– Allow this device to wake the server.

Ê

Press OK.

To execute the power down command in a DOS shell:

Using the shutdown -h command, your system saves all user data (e.g: open 
windows and running programs), shuts down the system, and transfers it to S4 
mode.