Fujitsu RX200 ユーザーズマニュアル
Options Guide
31
Accessible Drives
Installing the LocalView Module
Ê
Remove the dummy cover with a screwdriver.
V
CAUTION!
Keep the dummy cover for future use. If you remove the LocalView
module without installing a new one, you must reinstall the dummy
cover to comply with EMC regulations and to satisfy cooling require-
ments and fire protection measures.
module without installing a new one, you must reinstall the dummy
cover to comply with EMC regulations and to satisfy cooling require-
ments and fire protection measures.
Ê
Push the LocalView module into its bay until it engages.
Figure 15: Connecting the LocalView module
Ê
Connect the CN6 plug of the SCSI/fan board (see figure) using the IPMB
cable with the connector on the rear of the LocalView module.
cable with the connector on the rear of the LocalView module.
Ê
Close the server, plug in the power plugs, and switch on the server as
described in the chapter “Completion” on page 45.
described in the chapter “Completion” on page 45.
I
For information on operation and display modes, see the user documen-
tation for the LocalView module [6].
tation for the LocalView module [6].