Fujitsu RX200 ユーザーズマニュアル
![Fujitsu](https://files.manualsbrain.com/attachments/6c4642b33d2edbd09f94719c20a133aa0e862902/common/fit/150/50/80a45702a21fefb1823bce6851e87db450dccf7792cb572ebc8a90330a68/brand_logo.png)
40
Options Guide
Installing controllers
Controllers in Non-Hot-Plug PCI Slots
8.1
Installing controllers
Ê
Open the server as described in the chapter “Preparation” on page 15f.
Removing the riser card holder
Figure 22: Removing the riser card holder
Ê
Undo the two knurled screws (see figure).
Ê
Pull out the riser card holder upwards.
Installing a PCI board
Ê
Please read the documentation supplied with the PCI board.
Ê
Plug any necessary cables into the PCI board.
Ê
Remove the slot cover from the PCI board.
I
Keep the slot cover for future use. If you remove the board without
installing a new one, you must reinstall the slot cover to comply with
EMC regulations (regulations on electromagnetic compatibility) and
to satisfy cooling requirements and fire protection measures.
installing a new one, you must reinstall the slot cover to comply with
EMC regulations (regulations on electromagnetic compatibility) and
to satisfy cooling requirements and fire protection measures.