Nortel Networks 555-4001-135 ユーザーズマニュアル
174 Maintenance
553-3001-358/555-4001-135 Standard 02.00 July 2006
3
Set the new upgraded form as the default Calendar form. Follow the steps in
.
4
Clear the Microsoft Outlook forms cache using
.
5
Schedule a test meeting to ensure the upgrade was successful. Follow the
This procedure is now complete
steps in
.
Diagnostic tools
Use the following diagnostic tools to troubleshoot problems in the
system, including problems with the ICB. When diagnosing ICB
problems, use the following tools:
system, including problems with the ICB. When diagnosing ICB
problems, use the following tools:
•
LED indicators
•
display codes
•
card self-tests
•
sanity monitoring
•
diagnostic commands (that is, overlay commands for the CS 1000
and MAP commands for the CS 2100/Meridian SL-100)
and MAP commands for the CS 2100/Meridian SL-100)
•
history files
•
TCP/IP connectivity test
ICB status LED indicator
The ICB has a red LED indicator at the top of the faceplate that
indicates the status of the card. If the LED is lit, the card can be faulty
or manual busy (Man). The card goes through a series of tests. When
inserted into the slot or reset, the card:
indicates the status of the card. If the LED is lit, the card can be faulty
or manual busy (Man). The card goes through a series of tests. When
inserted into the slot or reset, the card:
•
blinks three times during self-test
•
runs software files from the PCMCIA to the ICB card
•
blinks three more times
•
stays on until a return to service (RTS) occurs
This procedure takes approximately 45 seconds. If the card turns on
and remains on without blinking, the card is not functioning correctly.
The LED turns off when the card returns to service.
and remains on without blinking, the card is not functioning correctly.
The LED turns off when the card returns to service.
Power Up Self-test
The ICB card has testability features that aid in fault isolation. When
inserted into an operating system module, when it is powered up, or
when the system is reset, each ICB card automatically performs a
Power Up Self-test. A Power Up Self-test can be performed on a card
using software commands or menus.
inserted into an operating system module, when it is powered up, or
when the system is reset, each ICB card automatically performs a
Power Up Self-test. A Power Up Self-test can be performed on a card
using software commands or menus.