Netgear RNDP6310-100NAS ユーザーズマニュアル

Previously Formatted Disks

You must take care when using previously formatted disks in your ReadyNAS unit, as 
described in the following table.

ReadyNAS unit has no disks 
(diskless)

Turn the unit off and insert the disk as described in 

7. Then, perform a factory default reboot as described in the boot 

menu section for your ReadyNAS unit:

• Ultra 2, Ultra 2 Plus, and Pro 2 

• Ultra 4, Ultra 4 Plus, Pro 4, NVX Pioneer, and NVX (Business Edition) 

This process erases all data and reformats the previously formatted 

disk to X-RAID2. If you want to preserve the data on the disk, you must 
move the data to an external drive before using the previously formatted disk 
in your ReadyNAS unit.

If you try to use a previously formatted disk in your unit without following this 
process, the unit will indicate that the disk is corrupt. 

ReadyNAS unit is operating with 
one or more disks

With the unit running, insert the disk in an empty disk bay as described in 

same format as your existing disks. 

This process erases all data on the previously formatted disk. If you 

want to preserve the data on the disk, you must move the data to an external 
drive before using the previously formatted disk in your ReadyNAS unit.

Previously formatted disks must appear on the NETGEAR Hardware Compatibility List, 
which is available at 

.