Lucent Technologies lucent ユーザーズマニュアル
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-52
display communication-interface
8
The
display comm
hop-channels
command displays the translation data for
hop channels. A hop channel is a bi-directional network channel between two
interface links for DCS message hopping. A hop channel is used to tandem DCS
messages from one interface link to another interface link.
interface links for DCS message hopping. A hop channel is used to tandem DCS
messages from one interface link to another interface link.
The
display communication-interface links
command displays the translation
information for each communication interface link. A link is an electronic
communication channel transmitted over the Packet Bus for carrying
packet-switched data. There are 16 links that terminate at one end on the Packet
Interface circuit pack in the SPE. At the physical and link layers, the link
terminates at the other end on a port on the PBX’s switching matrix. At a higher
level, the link continues over a transmission facility to another endpoint, such as a
DCS node or AUDIX. The link carries application messages between the SPE
and other switches or adjuncts.
communication channel transmitted over the Packet Bus for carrying
packet-switched data. There are 16 links that terminate at one end on the Packet
Interface circuit pack in the SPE. At the physical and link layers, the link
terminates at the other end on a port on the PBX’s switching matrix. At a higher
level, the link continues over a transmission facility to another endpoint, such as a
DCS node or AUDIX. The link carries application messages between the SPE
and other switches or adjuncts.
The
display comm processor-channel
command displays the translation
information for each of the local processor channels. A processor channel is one
several data streams which are multiplexed by the X.25 protocol onto a single
data link. The system has 128 total processor channels; up to 64 can be
assigned to a single link.
several data streams which are multiplexed by the X.25 protocol onto a single
data link. The system has 128 total processor channels; up to 64 can be
assigned to a single link.
for more details.
Output for Hop-channels qualifier
When you enter the command
display comm hop
, the systems displays the Hop
Channel Assignment screen, similar to the figure below. The number of the local
processor channel, used to hop the interface link channels, is not shown.
processor channel, used to hop the interface link channels, is not shown.
1.
Refer to the Report Scheduler and System Printer feature specification for more details.
Action/Object
Qualifier
Qualifier Description
Permissions
Defaults
Feature
Interactions
Interactions
display
communication-
interface
communication-
interface
hop-
channels
channels
links
processor-
channel
channel
print|
schedule
See above
See above
See above
Report sent to printer
Command is validated and then a
scheduling form displays to
schedule execution of the
command. The command is then
placed in the command queue
and is executed at the specified
time. The information displayed
by the command is sent to the
system printer instead of the
screen.
scheduling form displays to
schedule execution of the
command. The command is then
placed in the command queue
and is executed at the specified
time. The information displayed
by the command is sent to the
system printer instead of the
screen.
1
init
inads
craft
cust
rcust
inads
craft
cust
rcust
none
none