Lucent Technologies lucent ユーザーズマニュアル
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-119
list mst
8
Message format:
Events are defined in $BASEPJ/hdrs/evnt_defs.h. Events based on the call_p will
have the following auxiliary data:
have the following auxiliary data:
Events based on the grp_m will have the following auxiliary data:
IMT (D92)
The messages described in this section cannot be controlled directly through
any of the MST screens. They are enabled/disabled through TCM but their output
goes to the MST buffer. See [IMT] for details on these messages.
any of the MST screens. They are enabled/disabled through TCM but their output
goes to the MST buffer. See [IMT] for details on these messages.
A read-only field in the “change mst” screen, “Other Tracing?”, alerts the user
that one or more of these types of messages is enabled.
that one or more of these types of messages is enabled.
0x21 - IMT proc_errs
Message format:
0x22 - IMT crec
Message format:
Message[1-4]
= cid (defined in $BASEPJ/hdrs/capro.h)
Message[5-6]
= event
Message[7+]
= auxiliary data (based on event)
Message[7-8]
= vector number
Message[9-10]
= step number
Message[7-10]
= hunt group number
Message[1-4]
= process number(lname)
Message[5-8]
= sequence number (defined in *.p/hdrs/main_err.h, for
example: $BASEPJ/gmtce.ss/hmm.p/hdrs/main_err.h)
example: $BASEPJ/gmtce.ss/hmm.p/hdrs/main_err.h)
Message[9-12]
= data 1
Message[13-17]
= data 2
Message[1+]
= call record (defined as CALLR typedef in
$BASEPJ/hdrs/callr.h)
$BASEPJ/hdrs/callr.h)