Lucent Technologies lucent ユーザーズマニュアル
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-236
status cdr-link
8
status cdr-link
This command displays the status of call detail recording (CDR) links. Link up or
down status displays. If a link is down, the system displays the number of times
the switch attempts link setup.
down status displays. If a link is down, the system displays the number of times
the switch attempts link setup.
Call detail recording (CDR) links physically link SPEs to a recording device (for
example, printer) for sending CDR call records. CDR link are composed of a data
channel on the NETCON board or EIA port on the processor circuit pack, a
digital port and a data module. Two CDR links can exist in the system.
example, printer) for sending CDR call records. CDR link are composed of a data
channel on the NETCON board or EIA port on the processor circuit pack, a
digital port and a data module. Two CDR links can exist in the system.
Translation
Storage Space
Used (%)
Storage Space
Used (%)
Percentage of reserved storage space for storing translation files in
the memory card that saves translations to the memory card.
the memory card that saves translations to the memory card.
NOTE:
This percentage is valid for the specific memory card used in
the
This percentage is valid for the specific memory card used in
the
most recent
save translation operation (which is
implemented with the
save translation
command or with
scheduled maintenance and save translation enabled). If the
memory card is replaced with another card, or if no save
translation is performed on the new memory card, the
percentage does
memory card is replaced with another card, or if no save
translation is performed on the new memory card, the
percentage does
not
indicate the translation storage space
used in the new card.
File Name
Each formatted memory card has reserved a fixed space in the card
for each file. The starting address and size of each reserved slot is
pre-determined according to the capacity of the memory card. The
file name as defined in Table "Capacity of Memory Card" is shown in
this field.
for each file. The starting address and size of each reserved slot is
pre-determined according to the capacity of the memory card. The
file name as defined in Table "Capacity of Memory Card" is shown in
this field.
Data Present
The "Data Present" field is "y" when the file contains valid data.
Otherwise, the "Data Present" field has a value of "n."
Otherwise, the "Data Present" field has a value of "n."
Date Time
This field shows the date and time when the file was saved into the
memory card. For the "Software Upgrade" type of memory card, this
field contains the system software release number instead of the
time stamp. Due to the restriction of "core dump" file format, the year
information is not available in the date/time string.
memory card. For the "Software Upgrade" type of memory card, this
field contains the system software release number instead of the
time stamp. Due to the restriction of "core dump" file format, the year
information is not available in the date/time string.
Action/Object
Qualifier
Qualifier Description
Permissions
Defaults
Feature
Interactions
Interactions
status cdr-link
print
Report sent to printer.
Examples:
status cdr-link
status cdr-link print
status cdr-link print
init
inads
craft
cust
rcust
nms
bcms
browse
inads
craft
cust
rcust
nms
bcms
browse
none
none