Lucent Technologies lucent ユーザーズマニュアル
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-291
status pri-endpoint
8
Output
The following example shows the output from the
status pms-link
command.
Field descriptions
status pri-endpoint
This command displays internal software state information for diagnosis and can
help locate facilities with which a PRI endpoint is communicating. Status
information for each of the B-channels making up the PRI endpoint display in
addition to some overall PRI endpoint information.
help locate facilities with which a PRI endpoint is communicating. Status
information for each of the B-channels making up the PRI endpoint display in
addition to some overall PRI endpoint information.
Physical Link
State
Up
,
down
, or
extension not administered
; link is considered
administered only if an extension is given in the System Hospitality
form.
form.
Protocol State
up
,
down
, or blank if not administered.
Number of
Retries
Number of times the switch has tried to set up the link (only
displayed when the link is down; range 1-999)
displayed when the link is down; range 1-999)
Maintenance
Busy
yes
or
no
(technician has or has not busied out the link), blank if
PMS link not administered.
Action/
Object
Object
Qualifier
Qualifier Description
Permissions
Defaults
Feature
Interactions
Interactions
status
pri-endpoint
pri-endpoint
extension
print
PRI endpoint extension to be
displayed (see dial-plan).
displayed (see dial-plan).
Report sent to printer
Examples:
status pri-endpoint 25012
status pri-endpoint 77868
status pri-endpoint 66078 print
status pri-endpoint 77868
status pri-endpoint 66078 print
init
inads
craft
nms
browse
inads
craft
nms
browse
none
none
status pms-link
PMS LINK STATUS
Physical Link State: down
Protocol State: down
Number of Retries: 3
Maintenance Busy? no
Protocol State: down
Number of Retries: 3
Maintenance Busy? no