Lucent Technologies lucent ユーザーズマニュアル
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-311
status trunk
8
Field descriptions (group/member)
Group only
The following example shows the output from the
status trunk 78
(trunk group
only) command.
Trunk
Group/Member
Trunk group number/group member number (1-99/1-99)
Port
Port location (cabinet-carrier-slot-circuit)
Signaling
Group ID
If trunk is ISDN, then this field displays the number of the ISDN
Signaling Group to which this group belongs; otherwise, the field is
blank.
Signaling Group to which this group belongs; otherwise, the field is
blank.
Connected
Ports
Port locations (cabinet-carrier-slot-circuit) connected to the trunk
Service State
Trunk service state:
in-service/active, in-service/idle, out-of-service-NE,
out-of-service-FE, maint-NE/active, maint-FE/active, maint-NE/idle,
and maint-FE/idle.
in-service/active, in-service/idle, out-of-service-NE,
out-of-service-FE, maint-NE/active, maint-FE/active, maint-NE/idle,
and maint-FE/idle.
NE (Near End; switch) and FE (Far End; PRI terminal adapter or any
device that terminates the D-channel signaling) refer to which
“end” of the B-channel has placed the facility in the current state.
device that terminates the D-channel signaling) refer to which
“end” of the B-channel has placed the facility in the current state.
Maintenance
Busy
Whether any maintenance testing is being performed
CA-TSC State
State of the temporary signaling connection (used to pass call
information over PRI signaling links)
information over PRI signaling links)
status trunk 78/1
TRUNK STATUS
Trunk Group/Member: 078/001 Service State: in-service/idle
Port: 01C1505 Maintenance Busy? no
Signaling Group ID: CA-TSC State:
Connected Ports:
Port: 01C1505 Maintenance Busy? no
Signaling Group ID: CA-TSC State:
Connected Ports: