Patton electronic 2977 ユーザーズマニュアル

Model 2977 DialFire RAS User Guide

Driver installation for the Microsoft Windows NT operating system

2. Choose 

 from the menu. 

3. Configure permission. Use Microsoft Windows NT online help for information. 

Use this procedure to configure Dial-up Networking connections for a Patton Electronics adapter. 

Procedure
1. To access the Dial-up Networking utility, double-click 

 and then 

. 

2. Choose 

. 

3. Fill out configuration fields. Here are a few tips: 

– If you will use more than one telephone number to make the connection, do the following: (a) Fill in 

the telephone number (b) Choose the 

 button, (c) Add numbers. (d) Choose 

 when you are 

done. 

– In the 

 field, specify the device that will be used for the connection. 

– If you want to configure a Multilink connection, do the following: (1) Choose 

 in the 

 field. This entry will appear only if you have configured the connection in RAS for Multilink. (2) 

Choose 

. (3) Check any channels that are to be part of the multilink connection. 

– When providing telephone numbers, remember the following: (a) You may have to include the number 

9 or some other digit to get an outside line if your site uses a PBX or Centrex service. (b) For ISDN con-
nections, do not use spaces, dashes, or commas in the telephone number. (c) If this is a long distance 
call, be sure the telephone number includes the number 1 and an area code. 

– When selecting ISDN Devices, select the line type ordered from your service provider. 

4. Choose 

. 

Use this procedure to configure a Patton Electronics modem as a Microsoft Windows NT COM port. 

Procedure
1. Choose 

. 

2. Check 

 and then choose 

. 

3. Choose the Patton Electronics modem and then 

. 

4. Choose COM ports on which to install the modem and then 

. 

Use this procedure to uninstall a Microsoft Windows NT driver.

Procedure
1. Open the Windows NT Control Panel. 

2. Choose 

. 

3. Highlight the adapter and choose 

.