Patton electronic 29XX ユーザーズマニュアル
WAN Circuit CONFIGURATION window
283
Access Server Administrators’ Reference Guide
23 • Sync PPP
RECEIVE (framerelRxOctets)
Receive rate in bits per second.
Receive rate in bits per second.
No Buffers Available (framerelRxNoBufferAvailable)
The number of packets received when no receive buffers were available.
The number of packets received when no receive buffers were available.
Data Overflow (framerelRxDataOverflow)
The number of packets received with overflow indicated by the hardware.
The number of packets received with overflow indicated by the hardware.
Message Ends (framerelRxMessageEnds)
The number of packets received with message-correct endings. This value increases each time a valid packet is
received.
The number of packets received with message-correct endings. This value increases each time a valid packet is
received.
Packets Too Long (framerelRxPacketTooLong)
The number of packets received that were too long.
The number of packets received that were too long.
Overflow (framerelRxOverflow)
The number of packets received with overflow indicated by software.
The number of packets received with overflow indicated by software.
Aborts (framerelRxAbort)
The number of packets received that were aborted.
The number of packets received that were aborted.
Bad CRCs (framerelRxBadCrc)
The number of packets received with bad CRC values.
The number of packets received with bad CRC values.
Invalid Frames (framerelRxInvalidFrame)
The number of packets received with invalid frames.
The number of packets received with invalid frames.
Tx Underruns (framerelTxUnderrun)
The number of times the transmit buffer was not replenished in time to be sent out on the line.
The number of times the transmit buffer was not replenished in time to be sent out on the line.
LINK Resets (framerelResets)
Number of times the link was reset.
Number of times the link was reset.
Link Configuration
PPP protocol (pppDesiredFunction)
This is the actual desired kind of ppp protocol
This is the actual desired kind of ppp protocol
•
ppp(1)—point-to-point protocol
•
ppp-bcp(2)—bridge control protocol
Authentication Technique (pppAuthenticationTechnique)
The login technique used for authentication.
The login technique used for authentication.
•
none(0)—No authentication will be used