Patton electronic 29XX ユーザーズマニュアル
Dial In Modify default window
67
Access Server Administrators’ Reference Guide
7 • Dial In
Modify Login
on page 66) describes configuring the IP
address pool, login technique and general login information.
IP Address Pool (diIpPool)
The IP address pool contains the IP addresses that are assigned dynamically to the dial-in connections. Type the
IP address pool in the space provided. The IP addresses can be non-contiguous addresses configured as follows:
The IP address pool contains the IP addresses that are assigned dynamically to the dial-in connections. Type the
IP address pool in the space provided. The IP addresses can be non-contiguous addresses configured as follows:
– Blocks of IP addresses are designated with a dash (-) separating the first and last host in the block (for
example, 192.49.110.151-155)
– The addresses can be from a subnet other than the local network the RAS is on
– The IP address pool can have IP addresses from multiple subnets. The subnets must be separated by a
semi-colon (for example, 192.155.155.1-6; 192.155.160.41-46)
Note
The IP address pool is limited to 39 characters.
Login Technique (diLoginTechnique)
This variable defines the login sequence that a dial-up user will see. The various options are defined below:
This variable defines the login sequence that a dial-up user will see. The various options are defined below:
•
none(0)—no login sequence is enabled
•
textORpap(1)—This setting enables clear text logins or PPP calls using PAP authentication.
•
text(2)—A username prompt is displayed and a username must be entered. If the received username is a
static user with no password defined, then the connection completes and no password prompt is issued. If a
password is required then a password prompt is displayed and a password must be entered.
static user with no password defined, then the connection completes and no password prompt is issued. If a
password is required then a password prompt is displayed and a password must be entered.
Note
Text login with 56k ISDN and 64k ISDN is not supported.
•
pap(3)—This setting assumes that all calls will be PPP users. No username or password prompt will be dis-
played. The system will go directly to PPP processing. The dial-up user must be configured for PAP authen-
tication.
played. The system will go directly to PPP processing. The dial-up user must be configured for PAP authen-
tication.
Note
If the user trying to connect to the access server is not configured for PAP he
will be disconnected.
will be disconnected.
•
chap(4)—This setting assumes that all calls will be PPP users. No username or password prompt will be dis-
played. The system will go directly to PPP processing. The dial-up user must be configured on his computer
for CHAP authentication.
played. The system will go directly to PPP processing. The dial-up user must be configured on his computer
for CHAP authentication.
Note
If the user trying to connect to the access server is not configured for CHAP
he will be disconnected.
he will be disconnected.
•
chapORpap(5)—This setting assumes that all calls will be PPP users. No username or password prompt
will be displayed. The system will go directly to PPP processing. The dial-up user must be configured for
PAP or CHAP authentication. The access server will always request CHAP authentication first. Therefore,
if a user can negotiate either CHAP or PAP, CHAP authentication will be performed.
will be displayed. The system will go directly to PPP processing. The dial-up user must be configured for
PAP or CHAP authentication. The access server will always request CHAP authentication first. Therefore,
if a user can negotiate either CHAP or PAP, CHAP authentication will be performed.