Patton electronic 3125 ユーザーズマニュアル

Model 3125 RAS Getting Started Guide

Configuring the RAS with a Web browser

Configuring the line settings
1. Click on the 

Line Type

 pop-up menu (see figure 33 on page 49) and choose from the following options:

– For an E1/PRI line your options will be either dsx1E1(4) or dsx1E1-CRC(5)

– For an E1/R2 line your options will be either dsx1E1-MF(6) or dsx1E1-CRC-MF(7)

2. Click on the 

Line Coding

dsxHDB3(3). Most installations will use HDB3.

3. Click on the 

Line Build Out

4. Click on 

Yellow Alarm Format

 pop-up menu (see figure 33 on page 49) and choose from the following 

options:

– For an E1/PRI line choose linkYellowFormatDL(2)

– For an E1/R2 line choose linkYellowAlarmFormatBit2(1)

5. Click on 

.

At this point, the WAN front panel LEDs will become active. A solid green FRAME light indicator means that 
the RAS has synchronized with the E1 line. 

If you suspect that there is a physical malfunction in the WAN ports, 
you can assemble a loopback connector to test the port (see 
figure 34).

Figure 34. Pinout for loopback to test WAN port

If you have an E1/PRI (ISDN) line, refer to “Setting the line signaling for an E1/PRI (ISDN) line”. Otherwise, 
refer to “Setting the line signaling for an E1/R2 line”.