Motion Computing AB52242 ユーザーズマニュアル

69

The Motion Digitizer Pen tip 
doesn’t line up with the arrow-
cursor when I tap on the screen.

The pen and display need 
recalibrating.

Refer to “Calibrating Your Digitizer 
Pen” on page 20.

When I write, I unintentionally click 
the pen function button while I’m 
writing with the pen.

You’re pressing the pen button 
with your thumb or finger when 
you write or gripping the pen too 
tightly and accidentally pressing 
the pen button. This enables the 
right-click function of the pen.

Try these hints:
• Readjust how you hold the pen. 

Place your fingers on either side 
of the pen function button when 
you write.

• Practice using the pen function 

button with both your index fin-
ger and thumb to see which 
you prefer. 

• Relax your grip. Only a light 

touch is needed to write with
the pen.

• Deactivate the pen right-click 

function through WACOM Pen 
Settings. Instead, press and 
hold the pen to the display sur-
face to right-click.

The pen button doesn’t work. I 
can’t get it to right-click.

The right-click option for the pen 
button may be deactivated.

Re-activate the right-click option: 
Double-click the WACOM Pen 
Settings icon, select Pen Options, 
and reselect Use pen button to 
right-click. Select Apply>OK.

You may not be correctly timing 
clicking the pen button and 
tapping the pen on the display.

To right-click, hold the pen button 
down and then firmly tap on the 
display.

The buttons on the Tablet Client 
don’t do what I expect them to do.

The button functions are pre-
configured and cannot be 
changed.

The buttons are pre-configured.

The system doesn’t recognize the 
PC card I’ve inserted.

The card is incorrectly inserted.

Eject the card and re-insert it with 
the label side up.

The device is not supported.

Check Windows XP compatibility.

The system doesn’t recognize a 
USB device.

Windows XP may take a short 
time to recognize the device.

Wait until Windows XP recognizes 
the device.

The accessory isn’t connected to 
the Tablet Client correctly.

Check the connection cable and 
be sure it is inserted into the 
correct port on the Tablet Client 
and the accessory device.

The correct driver isn’t built into 
Windows XP.

Use the device’s installation CD or 
check the manufacturer’s website 
for the correct driver.