HP (Hewlett-Packard) HP EliteBook 2760p ユーザーズマニュアル

Remove the memory module (2) by pulling the module away from the slot at an angle.

Memory modules are designed with a notch (3) to prevent incorrect insertion into the

memory module slot.

Reverse this procedure to install a secondary memory module.

The top cover kit includes the TouchPad board and capacitive board.

Top cover

649768-001

Before removing the top cover, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet,

and then unplugging the AC adapter from the computer.

Remove the following components:

a. Remove the battery (see 

b. Remove the service access cover (see 

60

Chapter 4   Removal and replacement procedures