HP (Hewlett-Packard) HP EliteBook 2760p ユーザーズマニュアル

Lift the right side of the system board, and remove it from the base enclosure (3).

Reverse this procedure to install the system board.

The heat sink spare part kit includes replacement thermal material.

Fan/heat sink assembly

649759-001

Before removing the fan/heat sink assembly, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet,

and then unplugging the AC adapter from the computer.

Remove the following components:

a. Remove the battery (see 

b. Remove the service access cover (see 

Remove the SIM card (see 

d. Remove the memory module (see 

e. Remove the hard drive (see 

82

Chapter 4   Removal and replacement procedures