Citrix Systems 9.3 ユーザーズマニュアル

1. On the old appliance, create a backup copy of the configuration file (ns.conf).

2. Use a vi editor to edit the configuration file that you backed up. For example, you

might want to change the user name, host name, and password.

Note: You must remove all interface-related configuration, such as set interface,
bind vlan, add channel, bind channel, and set channel.

3. Shut down the old appliance.

4. Perform initial configuration on the new appliance. Connect to the serial console,

and at the command prompt type config ns to run the NetScaler configuration
script. Enter parameter values, such as NetScaler IP address and subnet mask. For
information about performing initial configuration by using the configuration utility
(GUI) or the LCD keypad, see 

5. Restart the new appliance.

6. Add a route on the new appliance. At the command prompt, type:

add route <network> <netmask> <gateway>

7. Copy the edited configuration file to the new appliance.

8. Copy other relevant files, such as bookmarks, SSL certificates, and CRLs, to the

new appliance. Return your feature license(s) to the Citrix licensing portal and
reallocate it on the new appliance. For more info about returning your licenses,
see 

Note: The platform license is different for a new appliance.

9. Restart the new appliance.

10. Add interface-related configuration specific to your new appliance, switch, and

router, and save the configuration.

If you have a high-availability setup, you must perform the above procedure on both
the nodes.

Chapter 6

Migrating the Configuration of an Existing NetScaler Appliance to Another Appliance

110