Toshiba Satellite R10 ユーザーズマニュアル

ページ / 384
4 Replacement Procedures 
4.17 Mic (L) cable guide 
Satellite R10 Maintenance Manual (960 -509)  
 
4-41 
4.17  Mic (L) cable guide 
Removing the mic (L) cable guide 
The following describes the procedure for removing the mic (L) cable guide. (See Figure 
4-27.) 
1.   Disconnect the mic (L) cable  from the connector CN6060  on  the system board 
and pull it out from the mic (L) cable guide. 
2.   Remove the following  screws  and mic (L) cable guide 
M2.0x6.0B  
FLAT BIND screw 
 
 
 
 
x2 
 
 
Figure 4 -27   Removing the mic (L) cable guide 
 
Installing the mic (L) cable guide 
The following describes the procedure for installing mic (L) cable guide (See Figure 4-
27). 
1.   Install the mic (L) cable guide  to the system board and secure it with  the 
following  screws 
M2.0x6.0B  
FLAT BIND screw 
 
 
 
 
x2 
2.   Connecting the mic (L) cable  to the connector CN6060  on the system board, 
arrange the cable along the mic (L) cable guide.