Winegard HD7696P プリント

 

Winegard Company • 3000 Kirkwood Street • Burlington, IA 52601-2000

INSTALLATION OF THIS ANTENNA NEAR POWER LINES IS DANGEROUS. 

FOR YOUR SAFETY, FOLLOW THE INSTALLATION INSTRUCTIONS.

  

Winegard Company warrants this Winegard product against any defects in materials or work-

manship within 90 (ninety) days from date of purchase. No warranty claim will be honored unless 

at the time the claim is made, you present proof of purchase to an authorized Winegard dealer (if 

unknown, please contact Winegard Company, 3000 Kirkwood Street, Burlington, IA 52601-2000, 

Telephone 800-288-8094).
  Winegard Company (at its option) will either repair or replace the defective product at no charge 

to you. This warranty covers parts, but does not cover any costs incurred in removal, shipping or 

reinstallation of the product. This limited warranty does not apply if the product is damaged, deterio-

rates, malfunctions or fails from: misuse, improper installation, abuse, neglect, accident, tampering, 

modification of the product as originally manufactured by Winegard, usage not in accordance with 

product instructions or acts of nature such as damage caused by wind, lightning, ice or corrosive 

environments such as salt spray and acid rain.
  The 90 Day Warranty is provided on the condition that the equipment is properly delivered with all 

handling and freight charges prepaid to your Winegard dealer for return to our factory for repair or 

replacement. Winegard dealers will arrange for the replacement or repair and return to you without 

charge the product which failed due to defective material or workmanship.
  WINEGARD COMPANY WILL NOT ASSUME ANY LIABILITIES FOR ANY OTHER WARRANTIES, 

EXPRESS OR IMPLIED, MADE BY ANY OTHER PERSON.
  ALL  OTHER  WARRANTIES  WHETHER  EXPRESS,  IMPLIED  OR  STATUTORY  INCLUDING 

WARRANTIES  OF  FITNESS  FOR A  PARTICULAR  PURPOSE AND  MERCHANTABILITY ARE 

LIMITED TO THE 90-DAY PERIOD OF THIS WARRANTY.
  The foregoing shall be the sole and exclusive remedy of any person, whether in contract, tort or 

otherwise, and Winegard shall not be liable for incidental or consequential damage or commercial 

loss, or from any other loss or damage except as set forth above.
  Some states do not allow limitations on how long an implied warranty lasts, or the exclusion of 

limitation of incidental or consequential damages, so the above limitations or exclusions may not 

apply to you.
  This warranty gives you specific legal rights and you may also have other rights which vary from 

state to state.

Printed in U.S.A.  © Winegard Company 2002 Rev3 12-13  1450290

Antenna Lead

In Wire

Ground

Clamp

Electric

Service

Equipment

Antenna

Discharge Unit

(NEC Section 810-20)

Power Service Grounding

Electrode System

(NEC Art 250, Part H)

Ground 

Clamps

Grounding Conductors

(NEC Section 810-21)

(May substitute a 75 ohm 

Coax Grounding Block)

Step 1. Mount the lightning arrestor or 

75 ohm coaxial grounding block as close 

as possible to where the 75 ohm coaxial 

cable downlead enters the house. See 

Figure 6.
Step 2. The ground wires for both the 

mast and the downlead should be copper 

or aluminum wire, number eight (8) or 

larger. See Figure 6.
Step 3. The downlead wire from the 

antenna to the lightning arrestor and the 

mast ground wire should be secured to 

the housewith stand-off insulators, spaced 

four (4) to six (6) feet apart. See Figure 6.
NOTE: In the case of a “ground up” an-

tenna installation, it may not be necessary 

to ground the mast if the mast extends 

four or more feet int the earth. Consult 

a TV serviceman for the proper depth in 

your location.