CyberPower Systems HT1108TNCGRU1 プリント

Thank you for selecting the CyberPower HT1108TNCGRU1 Surge Protector. 

The information contained in this brochure explains the features and operation 

of the HT1108TNCGRU1. Please take a few moments to read this manual.

Coax Protection

Network Protection

IN

OUT

IN

OUT

Always On

Always On

Grounded

Protected

ES On

Off

On

Energy

Saving

Volts

14A
10A

5A
1A

Master

Master Controlled

Master Controlled

Controls power to all outlets. The push button is also a 15A breaker. When an 

overload occurs, it will automatically switch off. To resume operation, ensure the 

overload condition is removed and reset the surge protector by switching the 

unit ON.
2. Rotating Power Cord with right-angle plug

The cord pivots 90° for convenience while keeping the outlets clear of cords.  

The slim right-angle plug design allows you to arrange your furniture closer to 

the wall.
3. Cord Management

Keeps power cords neat and organized.
4. Energy-Saving Master Outlet 

Automatically switches six master controlled outlets on or off.
5. Six Energy-Saving Master Controlled Outlets 

Automatically switched on or off by master outlet. 

(Only when the Energy Saving On/Off switch is set to the ON position).
6. Four Always on Outlets

Provide continuous power regardless of Master/Master-controlled outlets state.
7. Six Wide-Spaced Outlets 

Easily plug in large chargers without interfering with the other outlets.
8. ES On LED indicator 

Illuminated when the surge protector is set to the Energy Saving mode.
9. Protected LED indicator 

Illuminated when the surge protection feature is working properly. 
10. Grounded LED indicator 

Illuminated when a properly grounded AC outlet is detected.
11. Voltage Display

Displays voltage and current status.
12. Energy-Saving On/Off Control Switch

Turns Energy-Saving feature on or off. When set to the ON position, the master 

outlet will control power to the master-controlled outlets. When set to the OFF 

position, all eleven outlets will function as Always-on outlets.
13. Surge Protected Data Line Connections

Protects phones, modems, fax machines, and network cables from surges and spikes.
14. Surge Protected Cable and Satellite Connections

Protects coaxial lines from surges and spikes.
Audible alarm 

Sounds when the surge protection feature has reached full capacity and can no longer 

absorb surges and spikes.

The surge protector should be replaced if this alarm sounds.

1 Plug the power cord of the CyberPower surge protector into a 

standard grounded 120V AC outlet. If the LEDs do not light 

up, press the main power switch/circuit breaker on the left of 

the unit.

Risk of electric shock - Use only in dry locations and only indoors. 

DO NOT plug into another relocatable power tap. DO NOT “daisy 

chain” surge protectors. DO NOT use with any aquarium equipment. 

DO NOT use if properly grounded outlets are not available. DO NOT 

install this device if there is not at least 10 meters (30 feet) or more 

of wire between the electrical outlet and electrical service panel.

2 Plug the power cord of your primary home theater or 

home/office device, such as a TV or computer, into the 

Master outlet of the surge protector. 

   

Note: When this device is powered off or goes into a 

SLEEP or STANDBY mode, power to the devices plugged 

into the Master-controlled outlets will automatically be shut 

off to save energy normally being drawn by peripherals.

3 Plug the power cords of your secondary devices, such as 

a DVD player, A/V receiver, printer, scanner, etc., into the 

Master-controlled outlets of the surge protector. 

   Note: Do not plug any device into a Master-controlled 

outlet that you wish to use while the power of the primary 

device plugged into the Master outlet is powered off, as 

these outlets only provide power to the connected devices 

while the primary device is powered on.

4 Plug the power cords of any devices that require constant 

power, such as a DVR/PVR, lamp, or devices that you 

wish to use while the primary device is powered off, into 

the Always-on outlets of the surge protector.

5 Connect the incoming Ethernet (RJ45) line to the Network   

line jack marked IN on the surge protector.

6

 

Connect a separate Ethernet cable from the Network line 

jack marked OUT on the surge protector to the 

corresponding input jack on the device (i.e., Blu-ray 

player, set-top box, DVR, etc.).

7 Connect the incoming coaxial cable source (i.e., the cable 

jack on the wall or incoming satellite line) to the coaxial 

jack marked IN on the surge protector.

8 Connect a separate coaxial cable from the coaxial jack 

marked OUT on the surge protector to the coaxial input 

jack of the cable/satellite set-top box.

After all devices have been properly plugged into the surge 

protector and powered on, when you power the primary 

device that is plugged into the Master outlet on and off, the 

secondary devices that are plugged into the Master-controlled 

outlets will automatically power on and off.
Note: (1)To ensure this feature works properly, enable 

standby mode in your computer’s power management 

settings. For Windows, open the Control Panel, select 

Power Options, then under Settings for Power Schemes, 

select a system standby time period.

For Macs, open System Preferences and select 

(2) For TV application: please check your TV's manual and 

follow the step to set up the standby/ sleep mode.
Devices that are plugged into the Always-on outlets will not 

be controlled by the primary device, and must be powered 

on and off separately as desired.

A

lw

ay

s 

O

n

A

lw

ay

s 

O

n

G

rounded

P

ro

tec

ted

E

S

 O

n

O

ff

O

n

E

ner

gy

S

av

ing

Volt

s

14A

10A

5A

1A

M

as

ter

M

as

ter

 C

ont

rol

led

M

as

ter

 C

ont

rol

led

A

lw

ay

s 

O

n

A

lw

ay

s 

O

n

G

rounded

P

ro

tec

ted

E

S

 O

n

O

ff

O

n

E

ner

gy

S

av

ing

Volt

s

14A

10A

5A

1A

M

as

ter

M

as

ter

 C

ont

rol

led

M

as

ter

 C

ont

rol

led