Fujitsu P3PC-3662-01ENZ0 ユーザーズマニュアル
Cleaning the Outside of the ScanSnap
445
Cleaning the Outside of the ScanSnap
Clean the outside of the ScanSnap in the following procedure.
How to perform cleaning
1.
Unplug the cables from the ScanSnap.
2.
Clean the outside of the ScanSnap with a dry cloth, or a cloth moistened
with Cleaner F1/mild detergent.
ATTENTION
z
Never use paint thinner or any other organic solvents.
z
Be careful not to get any moisture or water inside the scanner during cleaning.
z
It may take a long time for Cleaner F1 to dry if an excessive amount is used. Moisten the cloth
with moderate quantity. Wipe off the cleaner completely to leave no residue on the cleaned parts.
with moderate quantity. Wipe off the cleaner completely to leave no residue on the cleaned parts.
Mild detergent of
Cleaner F1
Cleaner F1
Cloth
Thinner