Visioneer 9120 ユーザーズマニュアル

V

ISIONEER

 O

NE

T

OUCH

 9120 USB S

CANNER

 I

NSTALLATION

 G

UIDE

2. If the dotted line is not exactly where you want it, put the pointer 

on the line and drag the mouse.

For example, if you want the scan to include a border around the 
image, you can drag the dotted line to be slightly larger than the 
autotrimmed area.

To use the pointer to drag the line, make sure the pointer button is 
selected at the top of the window.

3. When the trimmed area is what you want, click Scan.

To manually set the output size for an item:
1. To scan the entire item on the glass, click Same as Original. No 

sections are trimmed.

2. To set the output size yourself, click Same as Original to remove 

the checkmark.

The settings for the output size become active.

3. Put the pointer on the image and drag the mouse to enclose the 

section you want in the scanned image.

As you drag the mouse, a dotted box appears on the image and the 
size settings change to reflect the new output size area. You can also 
type in the size settings boxes.

■

Width and Height—The measurements of the final image after 
it’s scanned; for example, if you plan to print the image on a 
standard paper, the width and height are 8.5 and 11.0 inches.

■

Units—Units of measurement for the new area; click the drop-
down arrow and choose new units if you want.

■

Resolution—The dots-per-inch (dpi) setting for the new area.

■

Scale—The amount of enlargement or reduction of the image to 
fill the width and height measurements; for example, if you 
select a small area and have set the width and height to a paper 
size, the scale automatically increases to enlarge the small image 
so it’s the same size as the paper.