Visioneer 8900 インストールガイド

V

ISIONEER

 O

NE

T

OUCH

 8900 S

CANNER

 I

NSTALLATION

 G

UIDE

4. Click OK to close the dialog box.

That’s it. Your scanner is ready to scan.

See “Scanning by Pressing the OneTouch Buttons” on page 14.

If the scanner icon on the Windows taskbar has a red “X” through it, the 
scanner is not properly connected.

Check for one of these possible problems:

•

Is a cable loose or not plugged in securely? Inspect all cable 
connections. Make sure all the cables are plugged in securely.

•

Is the scanner’s power light on? Turn on the scanner’s power. If the 
light still doesn’t come on, plug the power adapter into another 
electrical outlet.

•

Is the scanner’s locking tab in the locked position? Slide the 
locking tab to the unlocked position. If you tried to scan with the 
scanner locked, you must restart your computer after unlocking the 
scanner.

•

Did you restart the computer after installing the software? If you 
didn’t restart the computer, it may not have loaded all of the software 
files. Try restarting your computer.

Note:  The scanning lamp under the scanner’s glass needs to warm up 
before you can scan. A status message lets you know when the lamp is 
ready. The lamp then remains ready so you don’t have to wait for it to 
warm up each time you want to scan. To conserve electricity and 
prolong the life of the scanner, you can set the length of time for the 
lamp to remain lit before powering down. See “Setting Preferences” 
on page 25.