Wizard Ca Co CPT-8061 ユーザーズマニュアル

 
 

 
 

 

Appendix A: Using Wireless Scanners with Furniture Wizard 

      

73

 

 

6.  The scanner will now attempt to pair itself with the Access Point.  

ƒ 

When complete, the message Pairing Successful will appear in the scanner display 
window. 

ƒ 

If scanner pairing fails, repeat the steps above, making sure you have enabled 
Authentication and you have entered the PIN code exactly as it was when it was 
originally entered during Access Point configuration. 

7.  Once the pairing process is successful, power the scanner off by pressing the <Power> 

key, then press the  <Power> key again to turn it back on and proceed with the scanner 

configuration process. 

 

 

 

After you have uploaded the Scan-IT interface software to the CPT-8061 wireless scanners 
and paired them with Access Point, you must now configure each scanner so it can 

communicate with Access Point and your local area network. To do this, perform the 
following tasks: 

1.  Press the 

key to turn the scanner back on. To signify that new software  

has been uploaded to a scanner, the unit emits three loud beeps the first time it is 
powered on after a software installation. The following message is also displayed in the 

scanner information window: 

 

 

 

Displays Upon Startup after Program Installation