Motorola LS7708 ユーザーズマニュアル

Miscellaneous Scanner Options

14-3

Introduction

This chapter includes bar codes used to customize how data is transmitted to the host device. Also see each host chapter for the
appropriate host connections and host device features for the scanner. Before programming, follow the instructions in

Chapter 1,

Getting Started

The scanner is shipped with the settings shown in the

Table 14-1

(also see

Appendix A, Standard Default Parameters

for all host

device and miscellaneous scanner defaults). If the default values are suitable, programming is not necessary. Set feature values by
scanning single bar codes or short bar code sequences.

Throughout the programming bar code menus, asterisks (

) indicate default values.

Scanning Sequence Examples

In most cases, scan only one bar code to set a specific parameter value. Other parameters, such as Prefix Value, require scanning
several bar codes in sequence. See individual parameters for descriptions of this procedure.

Errors While Scanning

Unless otherwise specified, if an error occurs during a scanning sequence, just re-scan the correct parameter.

Miscellaneous Default Parameters

Table 14-1

lists the defaults for miscellaneous scanner options parameters. To change any option, scan the appropriate bar code(s)

beginning in

Miscellaneous Scanner Parameters on page 14-4

Scanning parameter setting bar codes with the primary scanner also changes settings on the auxiliary scanner.

See

Appendix A, Standard Default Parameters

for all user preferences, hosts, symbologies, and

miscellaneous default parameters.