Motorola MS4407 ユーザーズマニュアル

SSI Interface 8 - 15

This parameter sets the expected idle state of the Serial Host RTS line. 

The SSI Interface is used with host applications which also implement the SSI protocol. However, the decoder can 
be used in a "scan-and-transmit" mode to communicate with any standard serial communication software on a host 
PC (see 

). If transmission errors occur in this mode, the host PC may be 

asserting hardware handshaking lines which interfere with the SSI protocol. Scan the Host: RTS High bar code to 
address this problem.

This parameter selects whether to transmit decoded data in raw format (unpacketed), or with the packet format 
defined by the serial protocol.

Selecting the raw format disables ACK/NAK handshaking for decode data.