Motorola MS4407 ユーザーズマニュアル
6 - 8
Symbol MS4404/MS4407 Integration Guide
Power Mode
Parameter # 80h
This parameter determines whether or not power remains on after a decode attempt. In low power mode, the
imager enters into a low power consumption mode to preserve battery life after each decode attempt. In
continuous power mode, power remains on after each decode attempt.
imager enters into a low power consumption mode to preserve battery life after each decode attempt. In
continuous power mode, power remains on after each decode attempt.
Time Delay to Low Power Mode
Parameter # 92h
This parameter sets the time the imager remains active after decoding. The imager wakes upon trigger pull or
when the host attempts to communicate with the imager.
when the host attempts to communicate with the imager.
*Continuous On
(00h)
Low Power Mode
(01h)
NOTE
This parameter only applies when Power Mode is set to Low Power.
To program a different value for this parameter than those provided below, see the Simple Serial Interface
(SSI) Programmer Guide.
(SSI) Programmer Guide.
*
1 Second
(11h)
5 Seconds
(15h)