Motorola MSXX07 ユーザーズマニュアル

Parameter Menus 10 - 15

When in Continuous triggering mode, this parameter sets the minimum duration of not decoding data before the 
scanner decodes a second bar code identical to one just decoded. This reduces the risk of accidentally scanning 
the same symbol twice. It is programmable in 0.1 second increments from 0.0 to 9.9 seconds. The recommended 
interval is 0.6 seconds

This option sets the minimum duration of not decoding data before the scanner decodes a second (different) bar 
code. Use this in Continuous mode to prevent the scanner from decoding when a different symbol appears in the 
scanner's field of view before the timeout period between decodes expires. This is programmable in 0.1 second 
increments from 0.0 to 9.9 seconds. The recommended value is 0.0 seconds.

Select the timeout between decodes for the same or different symbols.

Scan the option bar code to set.

Scan two numeric bar codes beginning on 

 which correspond to the desired interval, in 0.1 second 

increments.

To change the selection or to cancel an incorrect entry, scan the 

 bar code on 

.