Motorola MSXX07 ユーザーズマニュアル
Scanning
3 - 7
Beeper and LED Definitions
provides standard beeper definitions, and
provides LED definitions.
Table 3-1
Standard Beeper Definitions
Beeper Sequence
Indication
Standard Use
1 Beep - short high tone
A bar code symbol was decoded (if decode beeper is enabled).
1 Beep - long high tone
Thermal shutdown.
3 Beeps - short high tone
(Symbol MS2207/2207VHD/3207 only)
Power-on or reset. Occurs immediately after the scanner is turned on,
indicating that the system software is working properly. If three beeps
occur during normal operation, it is due to a reset and any work in
progress is lost. If this occurs often, contact Motorola Enterprise
Mobility Support.
indicating that the system software is working properly. If three beeps
occur during normal operation, it is due to a reset and any work in
progress is lost. If this occurs often, contact Motorola Enterprise
Mobility Support.
Parameter Menu Scanning
2 Beeps- short high tone
Correct entry scanned or correct menu sequence performed.
1 Beep- hi/lo/hi/lo tone
Successful program exit with change in the parameter setting.
2 Beeps - lo/hi tone
Input error, incorrect bar code, or Cancel scanned, wrong entry,
incorrect bar code programming sequence; remain in program mode.
incorrect bar code programming sequence; remain in program mode.
Communication
4 Beeps - short high tone
Communication error.
4 Beeps - hi/hi/hi/lo
Receive error.
3 Beeps - lo/hi/lo
ADF transmit error.
Table 3-2
LED Definitions
LED
Indication
Red
Scanner is on.
Green
A bar code was successfully decoded.