Motorola MSXX04 ユーザーズマニュアル

10 - 98 Symbol MiniScan MSXX04 Series Integration Guide

The intercharacter delay gives the host system time to service its receiver and perform other tasks between 
characters. Select the intercharacter delay option matching host requirements. The delay period can range from no 
delay to 99 msec in 1 msec increments. After scanning the bar code below, scan two bar codes beginning on 

 to set the desired time-out. To change the selection or cancel an incorrect entry, scan the 

 bar code 

on 

This parameter specifies how long the decoder waits for an ACK or NAK before resending. Also, if the decoder 
wants to send, and the host has already been granted permission to send, the decoder waits for the designated 
time-out before declaring an error.

The delay period can range from 0.0 to 9.9 seconds in 0.1 second increments. After scanning the bar code below, 
scan two numeric bar codes beginning on 

. Time durations of less than 1.0 second require a 

leading zero. To change the selection or cancel an incorrect entry, scan the 

 bar code on 

.

This parameter determines the maximum time the decoder waits between characters transmitted by the host 
before discarding the received data and declaring an error. The time-out is set in 0.01 second increments from 0.01 
seconds to 0.99 seconds. After scanning the bar code below, scan two bar codes beginning on 

the desired time-out. To change the selection or cancel an incorrect entry, scan the 

 bar code on