Motorola DS6707 ユーザーズマニュアル
1 - 3
Symbol DS6707 Digital Imager Scanner Product Reference Guide
Setting Up the Digital Imager Scanner
Installing the Interface Cable
1.
Plug the interface cable modular connector into the cable interface port on the bottom of the scanner handle.
See
See
.
2.
Gently tug the cable to ensure the connector is properly secured.
3.
Connect the other end of the interface cable to the host (see the specific host chapter for information on host
connections).
connections).
Figure 1-2
Installing the Cable
Removing the Interface Cable
1.
Using the tip of a screwdriver, depress the cable’s modular connector clip.
Figure 1-3
Removing the Cable
2.
Carefully slide out the cable.
3.
Follow the steps for
to connect a new cable.
Clip
To host
Cable interface port
Interface cable modular
connector
connector
NOTE
Different hosts require different cables. The connectors illustrated in each host chapter are examples only.
Connectors vary from those illustrated, but the steps to connect the digital imager scanner are the same.
Connectors vary from those illustrated, but the steps to connect the digital imager scanner are the same.