Motorola DS6707 ユーザーズマニュアル

Scanning

2 - 5

When the digital imager scanner senses movement, in its default Auto Aim trigger mode, it projects a red laser 
aiming pattern (

) which allows positioning the bar code or object within the field of view. (To turn off 

the default Auto Aim trigger mode, see 

.) If necessary, the digital imager scanner 

turns on its red LEDs to illuminate the target bar code.

The DS6707-DP version uses a donut-shaped pattern with a center aiming dot.

Center the symbol in any orientation within the aiming pattern. Be sure the entire symbol is within the 
rectangular area formed by the brackets in the pattern.

When scanning with the DS6707-DP, ensure part of the bar code is visible on the inside of the donut-shaped 
pattern.

Hold the trigger until the digital imager scanner beeps, indicating the bar code is successfully decoded. For 
more information on beeper and LED definitions, see 

 and 

.

This process usually occurs instantaneously. Steps 2 - 4 are repeated on poor quality or difficult bar codes, until the 
bar code is decoded, the trigger is released, or the Decode Session Timeout is reached. 

DS6707-DP Pattern

Standard Pattern

1D bar code

2D bar code

DS6707-DP Pattern

Data Matrix bar code