Motorola LS9208 ユーザーズマニュアル
6-1
Chapter 6
RS-232 Interface
Introduction
This chapter covers RS-232 host information for setting up your scanner. The RS-232
interface is used to attach the scanner to point-of-sale devices, host computers, or other
devices with an available RS-232 port (e.g., com port).
interface is used to attach the scanner to point-of-sale devices, host computers, or other
devices with an available RS-232 port (e.g., com port).
Note: : This scanner utilizes TTL RS-232 signal levels, which will interface
with most system architectures. For system architectures requiring
RS-232C signal levels, Motorola offers different cables providing the
TTL to RS-232C conversion. Contact the Global Customer
Interaction Center for more information.
RS-232C signal levels, Motorola offers different cables providing the
TTL to RS-232C conversion. Contact the Global Customer
Interaction Center for more information.
If your particular host is not listed in
, you need to set the communication
parameters to match your host device. To set communication parameters for hosts not
listed, refer to the documentation for the host device.
listed, refer to the documentation for the host device.