Motorola LS9208 ユーザーズマニュアル

11-12

Supplementals are additionally appended characters (2 or 5) according to specific code 
format conventions (e.g., UPC A+2, UPC E+2, EAN 8+2). The following options are 
available:

•

If you select Ignore UPC/EAN with Supplementals, and the scanner is 
presented with a UPC/EAN plus supplemental symbol, the scanner decodes 
UPC/EAN and ignores the supplemental characters.

•

If you select Decode UPC/EAN with Supplementals, the scanner only decodes 
UPC/EAN symbols with supplemental characters, and ignores symbols without 
supplementals.

•

If you select Autodiscriminate UPC/EAN Supplementals, the scanner decodes 
UPC/EAN symbols with supplemental characters immediately. If the symbol does 
not have a supplemental, the scanner must decode the bar code the number of 
times set via 

 on page 11-19 before 

transmitting its data to confirm that there is no supplemental.

•

If you select one of the following Supplemental Mode options, the scanner 
immediately transmits EAN-13 bar codes starting with that prefix that have 
supplemental characters. If the symbol does not have a supplemental, the scanner 
must decode the bar code the number of times set via 

before transmitting its data to confirm that there is no 

supplemental. The scanner transmits UPC/EAN bar codes that do not have that 
prefix immediately.

Note: If you select 978/979 Supplemental Mode and are scanning 

page 11-11 to enable Bookland EAN, and select a format using 

•

Enable Smart Supplemental Mode - applies to EAN-13 bar codes starting with 
any prefix listed previously.