Motorola LS9208 ユーザーズマニュアル
1-6
Symbol LS9208 Product Reference Guide
Connecting a Synapse Cable Interface
Note: See the Synapse Interface Guide provided with your Synapse cable
for detailed setup instructions.
Symbol’s Synapse Smart Cables enable interfacing to a variety of hosts. The appropriate
Synapse cable has the built-in intelligence to detect the host to which it is connected.
Synapse cable has the built-in intelligence to detect the host to which it is connected.
Figure 1-3. Synapse Cable Connection
1.
Plug the Synapse adapter cable (p/n
25-32463-xx)
into the bottom of the scanner,
as described in
2.
Align the ‘S’ on the Synapse adapter cable with the ‘S’ on the Synapse Smart Cable
and plug the cable in.
and plug the cable in.
3.
Connect the other end of the Synapse Smart Cable to the host.
Configuring Your Scanner
Two methods are available to configure your scanner: using the bar codes included in this
manual, or the 123Scan
manual, or the 123Scan
configuration program.
Refer to
for information about programming your scanner
to configure your scanner using this
configuration program. A help file is available in the program.
The scanner supports RS-232, IBM 468X/469X, Keyboard Wedge, Wand Emulation, USB,
and Synapse to interface to a host system. Each host specific chapter describes how to set
up each of these connections.
and Synapse to interface to a host system. Each host specific chapter describes how to set
up each of these connections.
Synapse adapter cable
To scanner
Synapse Smart Cable
To host