Motorola LS9208 ユーザーズマニュアル

2-2

Install and program your scanner. (Refer to each host chapter and 

, and 

 for instructions on programming your scanner.) If 

you need assistance, contact your local supplier or call the Global Customer Interaction 
Center. See 

 for contact information.

1.

Ensure all connections are secure. (Refer to the host chapter for your scanner.)

2.

Pick up the scanner. Press and then release the trigger. A single scan line 
displays. 

3.

Ensure the scan line crosses every bar and space of the symbol.

4.

Depress and hold the trigger until either:

a.

The scanner reads the bar code. The scanner beeps, the LED flashes and the 

laser turns off. 

b.

The scanner does not read the barcode and the laser turns off.

5.

Release the trigger. This causes the aim scan line to reappear. To read another bar 
code in single-line mode, repeat steps 2, 3 and 4. This step can be repeated as 
often as desired.

6.

After a programmable time period, the omni-directional scan pattern displays. This 
indicates the scanner is ready to read bar codes without use of the trigger.

7.

For more information on beeper definitions, refer to 

.