Epson 10000XL ユーザーズマニュアル

Solving Problems

■

Check the position and condition 
of your document. Make sure it is 
flat against the scanner’s document 
glass. If only part of the image is 
blurred, your document may be 
wrinkled or warped. 

■

If you’ve placed transparent film 
directly on the document glass, or 
if you’re using film holders other 
than those that came with the 
TPU, you may have to adjust the 
focus (see page 52). 

■

Try applying 

Unsharp Mask 

(see 

■

Make sure the document table 
glass is clean.

■

Make sure the scanner is on a flat, 
stable surface, and your document 
didn’t shift during scanning.

■

Don’t place your document right 
up against the edges of the 
document table. Move the 
document about 1/16 of an inch 
away from the edges.

■

If colors are patchy or distorted at 
the edges of the image, the 
document may be too thick, or 
there may be outside light 
interfering with the scan. If you are 
scanning without the cover, place 
paper over the edges of the 
document to block outside light.

■

Check the position of your 
document. Carefully align it with 
the edges of the document table.