Datalogic Scanning 8500 ユーザーズマニュアル

When this feature is enabled, the software will not decode an RSS 
Expanded bar code with a 2D component associated with it, and the 2D 
component will be discarded.

To set this feature:

1. Scan the SWITCH bar code.

2. Scan your selection from the bar codes below. You’ll need to cover 

any unused bar codes on this and the facing page to ensure that 
the scanner reads only the bar code you intend to scan.

3. Complete the programming sequence by scanning the SWITCH 

bar code.

RSS EXPANDED 2D COMPONENT = DISABLE

RSS EXPANDED 2D COMPONENT = ENABLE