Canon DR-2510C ユーザーズマニュアル
Chapter 3 Appendix
- 30 -
3
3
Open the roller cover on the main unit by placing your fingers in the
grooves and pulling it down.
grooves and pulling it down.
4
Lift up the roller fixing lever (
c
), and slide it to the left (
d
).
5
Remove the feeding roller by moving it to the left to detach it from its shaft,
and pull it out of the slot.
and pull it out of the slot.
Attaching the Feeding Roller
1
Insert the feeding roller into the slot inside the roller cover, and align the
notch on the roller with the shaft on the main unit.
notch on the roller with the shaft on the main unit.
2
Slide the roller fixing lever to the right to lock the roller into the hole on the
left of the feeding roller.
left of the feeding roller.
3
Push down the lever to lock the shaft of the feeding roller into place.