Canon DR-2510C ユーザーズマニュアル

Click the [Maintenance] tab 

→ [Reset].

Confirm that the counter for the selected roller is set to 0 

→ click [OK].

This section describes the possible problems that might occur during use of the 
scanner and how to solve them.

The Scanner Does Not Turn ON ..................................................................(P. 35)
The Scanner Is Not Recognized..................................................................(P. 35)
Slow Scanning Speed.................................................................................(P. 36)
Scanning Is Not Performed ........................................................................(P. 36)
Documents Do Not Feed Properly ..............................................................(P. 36)
Saved Image Files Do Not Open .................................................................(P. 37)
Scanning Results Are Not as Expected .......................................................(P. 37)

If, after consulting this section, you still cannot resolve the problem, contact your 
local authorized Canon dealer or service representative.

× The Scanner Does Not Turn ON

Check the following if the scanner does not turn ON:

•

Is the power switch turned ON?

•

Is the power cord connected correctly?

•

Is the power cord inserted into the power outlet?

For details on connecting the power cord, see Chapter 2, "Setup," in the User 
Manual.

× The Scanner Is Not Recognized

The following are possible causes of the PC failing to recognize the scanner. Check 
each possible cause.

Problem
Solution

The scanner is not connected correctly
Make sure that the scanner and the computer are connected 
correctly with the USB cable. (See Chapter 2, "Setup," in the User 
Manual.)