Canon DR-M160 ユーザーズマニュアル

26

The scanner can scan documents ranging in size from business cards 
to LTR/A4. The document sizes that this scanner can scan are shown 
below.

Size

Width:  50.8 mm to 216 mm (2" to 8.5")
Length:  54 mm to 356 mm (2.12" to 14") (You can scan 

documents up to 3,000 mm (118.1") long by setting the 
scanner to the Long Document mode.)

Paper thickness

Normal feed: 27 to 209 g/m

2

 (7 to 56 lb bond) 0.04 mm to 

0.25 mm (0.00157" to 0.00984")

Bypass: 

27 to 255 g/m

2

 (7 to 68 lb bond) 0.04 mm to 

0.3 mm (0.00157" to 0.0118")

The documents to be scanned must satisfy certain criteria. Read the 
following items carefully.

• When scanning multiple documents of different sizes, place the 

documents so that they cover the entire span of the feed rollers by 
aligning the centers and leading edges of the documents.

• It is recommended that documents exceeding 356 mm (14") size 

are fed one sheet at a time.

• Scanning documents before the ink is dry can cause problems with 

the scanner. Always make sure that the ink on a document is dry 
before scanning it.

• Scanning documents that are written in pencil or similar material 

may make the rollers and scanning glass dirty, which can lead to 
smudges on the scanned image and transfer the dirt to subsequent 
documents. Always clean the internal parts of the scanner after 
scanning such documents.

• When scanning a two-sided document that is printed on thin paper, 

the image on the opposite side of each page may show through. In 
this case, adjust the scanning intensity in the application software 
before scanning the document.

• When the paper of the document is thin, switch to thin paper mode 

and then feed the document. Refer to the User Manual for detailed 
information.

• Scanning the following types of documents can cause a paper jam 

or malfunction. To scan such a document, make a photocopy of the 
document and then scan the photocopy.

Size: 

50 mm x 85 mm (1.97" x 3.35") or larger

Paper thickness:  380 g/m

2

 (80 lb bond) 0.15 mm (0.0059") or larger

Orientation: 

Vertical feeding only

If a stack of business cards cannot be fed properly, reduce the 
number of cards in the stack.

Size: 

53.9 mm x 85.5 mm (2.12" x 3.37") (ISO standard)

Card thickness:  1.4 mm (0.055") or smaller
Orientation: 

Horizontal feeding only

Embossed cards can be scanned.

Feed roller

Align the leading edges

Align the centers

There are creases or 
fold lines.

Carbon paper

There are curls.

The surface is coated.

There are tears.

Extremely thin document 
such as semi-transparent 
thin paper.

There are clips or 
staples.

Documents with excessive 
paper dust particles.

0-00-DR-M160_RG_UK.book  Page 26  Thursday, June 9, 2011  8:04 PM