Canon DR-M160 ユーザーズマニュアル

ページ / 56
33
3
Set the scan method in the top screen.
A Specify whether to enable continuous scanning. When 
scanning multiple documents as one scanned image or 
splitting up a large document to scan in parts, select [ON] to 
enable continuous scanning.
B Specify whether to scan the document in full auto mode. When 
you want to specify arbitrary scanning conditions, select [OFF] 
and configure the scanner settings. (See p. 37)
4
Click the Start button.
The document is scanned. While scanning is in progress, the 
number of pages scanned is displayed in addition to the scanner 
settings.
When scanning is finished, the Output settings screen appears.
IMPORTANT
If you configure scanning conditions that consume a large 
amount of the computer's memory, scanning may stop because 
of insufficient memory. If an error message appears due to 
insufficient memory while scanning is in progress, exit the 
application, change the scanning conditions, and then try 
scanning again.
Hint
If a document is scanned when [Enable continuous scanning] is 
set to [ON], the Continuous Scanning screen (see p. 39) appears 
when the scanning of the document is finished.
If you place the next document and click [Scan], scanning of the 
document starts.
When scanning of all the documents is finished, click [Next step].
A
B
0-00-DR-M160_RG_UK.book  Page 33  Thursday, June 9, 2011  8:04 PM