Canon DR-G1130 ユーザーズマニュアル
4-7
Chapter 4 Other Functions
■ Long Document Mode Setting
You can enable this mode to scan document pages up to
3,000 mm (118.1") long when the Auto Detection page
size setting is selected.
3,000 mm (118.1") long when the Auto Detection page
size setting is selected.
ON2: Automatically detects page sizes when scanning
documents up to 3,000 mm (118.1") long.
ON1: Automatically detects page sizes when scanning
documents up to 1,000 mm (39.4") long.
OFF: Automatically detects page sizes when scanning
documents up to 432 mm (17") long.
Hint
Feeding a document longer than maximum detectable page
size for Auto Detection causes paper jams, and transport stops.
size for Auto Detection causes paper jams, and transport stops.
■ Continuous Manual Feeding Mode Setting
This mode disables automatic feeding by the pickup roller,
so that the loaded document stack must be fed by hand one
sheet at a time by the operator.
so that the loaded document stack must be fed by hand one
sheet at a time by the operator.
ON: The pickup roller is disabled.
OFF: Documents are fed by the pickup roller.
OFF: Documents are fed by the pickup roller.
■ Setting the manual feed time for feeding
intervals
Set the time that the feed roller will continue to rotate after
feeding in a sheaf of documents.
0: 0s
1: 30s
2: 60s
3: 180s
4: 300s
feeding in a sheaf of documents.
0: 0s
1: 30s
2: 60s
3: 180s
4: 300s
■ Stand-by Mode Setting
Selects the amount of time (240, 60 or 10 minutes) from
when the scanner is last used to when the Stand-by mode
is activated.
when the scanner is last used to when the Stand-by mode
is activated.
■ Display Language Setting
Selects English, Japanese or French for the language to
display on the control panel.
EN: English display panel
JP: Japanese display panel
FR: French display panel
display on the control panel.
EN: English display panel
JP: Japanese display panel
FR: French display panel
■ Display Contrast Adjustment
Use to adjust display panel contrast.