Canon GM-1000 ユーザーズマニュアル

CANON  Digital Galvano Scanner System  GM-1000 Series 
Users Manual 1.20 
 

132

 

11.1.  Firmware Update 

 

The GC-201 controller is equipped with two DSP’s (Digital Signal Processor) for Axis 1 and for Axis 2, 

and the same firmware is written in each DSP. 

When firmware is upgraded for the addition of functions and fixing problems, it is possible to connect a 

RS-232C cable and update the firmware with dedicated write software. 

A dedicated firmware update CD will be provided when there is a necessity to update the firmware. 

Please contact your sales representative about the firmware update CD. 

【

Firmware Update CD】 

     

The CD contains the following files. 

GCFlash.exe   (Dedicated write software)   

  F2812SerialFlash.out 

2812.m00 

2812.m01 

  6727.hex 

 

 

Note: 

As part of the firmware update operation, it will be necessary to operate DIP switches and jumper 

switches on the GC-201 controller. Please carry out static electricity counter-measures such as using 

an earth band during operation to avoid electrostatic discharge failure.