Canon GM-1000 ユーザーズマニュアル

 

CANON  Digital Galvano Scanner System  GM-1000 Series 
Users Manual 1.20 
 
 

19

•  RS-232C command input 
•  High-speed serial communication 

- Raster scan and step movement etc. 

can be performed easily. 

- In order to obtain synchronization 

with external equipment, operation 

can be started with an external 

trigger signal. (Fluctuating delays 

may occur within the internal control 

sampling time.) 

- Vector scans with control over the 

desired locations of two axes are 

possible. This is used in laser 

marking etc. 

 

- Complete synchronization with 

external equipment can be obtained 

in order to use high-speed serial 

communication clock pulses by 

controlling the controller. 

 

- As it can be operated with XY2-100 

communication specifications, a 

controller compliant with XY2-100 

can be connected. 

RS-232C communication command 

High-speed serial communication 

 

RS-232C communication command 

RS-232C communication command 

Uses the controller GC-201 internal 

circuit clock pulses 

Uses high-speed serial 

communication clock pulses 

- A target position command input by an RS-232C communication command, or a target position 

command from a high-speed serial communication can be mutually switched with a command. (See 

2.8.5.    “RS-232C Communication Command Input and High-Speed Communication Switching”)