Epson 2500 ユーザーズマニュアル

7. If the nozzle check pattern is complete, click 

Finish

. 

If the pattern is missing dots, click 

Clean

 to run another 

cleaning cycle. 

8. If you don’t see any improvement after cleaning two or 

three times, check the print quality solutions in “Solving 
Print Quality Problems” on page 145.

You can also turn off the printer and wait overnight—this 
allows any dried ink to soften—then clean the print head 
again.

Examine the nozzle check pattern you print. It should look 
something like this (the upper pattern is black; the lower section 
is cyan, magenta, and yellow):

Each staggered horizontal and straight vertical line should be 
complete, with no gaps in the dot pattern. If your printout 
looks okay, you’re done. If any dots are missing, as shown 
below, clean the print head again.

Missing dots