Canon DR-2010C ユーザーズマニュアル

Previous Page Next Page

cStart button

If Feeding Option is set to [Panel-Feeding], clicking this button starts scanning. 

dStop button

Stops scanning.

eJob display

When the Start and Stop functions are assigned to the job buttons, [Start] and 
[Stop] are shown here.
If nothing is shown on the job display, the Start and Stop functions are not 
assigned to the job buttons. In this case, you should use the Start and Stop 
buttons on the Scan Panel.

fBatch separation button

After selecting [Panel] as the batch separation setting on the [Others] tab, if you 
enable batch separation from the application and start scanning, this button 
becomes active when scanning of the current document completes, and 
scanning stops. When clicked, this button depresses and remains depressed 
while scanning with batch separation continues, until scanning of the current 
document completes, and scanning stops. The button then returns to normal.

This section describes examples of settings that can be specified when scanning 
with the DR-2010C/DR-2510C. For more information, see Chapter 4, "ISIS/TWAIN 
Driver Settings," or the Online Help.

You can set the scanning conditions to enhance the text of documents with dark 
backgrounds or documents with a light uniform background and low-contrast text.
Click the [Basic] tab in the settings dialog box, and then click [Advanced Text 
Enhancement] or [Advanced Text Enhancement II] in the [Mode] box.
For more information on setting the scanning conditions, see Chapter 4,
"ISIS/TWAIN Driver Settings - Scan Mode Settings."

You can set the scanning conditions to detect whether the document to scan is in 
color or black and white, and save it as a color image or black and white image 
accordingly.
Click the [Basic] tab in the settings dialog box, and then click [Auto Color 
Detection] in the [Mode] box.
For more information on setting the scanning conditions, see Chapter 4, 
"ISIS/TWAIN Driver Settings - Auto Color Detection."

X