Toro 1200 ユーザーズマニュアル
Line Painter 1200
Page 5 – 28
Paint System
Spray Pump
1. Tank
support
2. Flange head screw (4 used)
3. Spray pump assembly
4. Flange nut (3 used)
5. Pulley
6. Flat
washer
7. Cap
screw
8. Lock
washer
9. Set
screw
10. Square key
11. Chassis
12. Cap screw (3 used)
13. Flush tank
14. Paint tank
Figure 30
FRONT
RIGHT
2
3
4
1
5
6
7
8
10
11
12
9
13
14
Removal (Fig. 30)
1. Drain paint tank (see Operator’s Manual).
2. Park machine on a level surface, stop engine, en-
gage parking brake and remove key from the ignition
switch. Remove high tension lead from the spark plug
and position the lead away from the spark plug.
3. Remove spray pump drive belt (see Spray Pump
Drive Belt Removal in this section).
4. Loosen two (2) set screws and then remove cap
screw (item 7), lock washer (item 8) and flat washer
(item 6) that secure pulley to pump shaft. Slide pulley
from pump shaft. Locate and retrieve square key (item
10).